Cardboard

The CTT2 is a universally applicable crease tool. Accommodates a wide range of crease wheels for folding carton, polypropylene, twin wall sheets, etc.

• Clean creases without tearing
• Directional pressure adjustments
• Compatible with G3, S3, D3

The Electric Oscillating Tool is suitable for cutting soft to medium-density materials. The high oscillating frequency enables high processing speed and efficient throughput.

Depending on the application, the EOT is available with 0.5 mm or 1.0 mm stroke. To accommodate different substrates and levels of detail, Zünd offers a wide range of both flat and pointed oscillating blades.

• Depending on application, available with 0.5 mm or 1.0 mm stroke
• Perfect for cutting detailed contours
• Very high stroke frequency
• High processing speeds
• Compatible with G3, S3, D3, L3

The Passepartout Tool is the ideal tool for creating precise 45 ° bevel cuts for mat-cutting and picture-framing applications. It is particularly suitable for processing cardboard and polymer materials up to 5 mm/ 3/16 in thick.

An adjustment gauge facilitates precise positioning of the blade in the holder. This enables perfect cuts and very high repeatability.

• Precise depth control
• Adjustment gauge included
• Processes cardboard and polymer materials up to 5 mm thick
• Compatible with G3, S3, D3

The PTT1 is designed to accommodate perforating blades. This tools can create perf lines more efficiently than an oscillating tool. Perforations are used, among other things, to facilitate folding/bending along crease lines. This allows for greater precision. In addition to traditional materials such as corrugated cardboard, folding carton, and PP (polypropylene), vinyl can also be perforated using this tool.

• Suitable for corrugated cardboard, folding carton, polypropylene, vinyl
• High-quality perforations
• High processing speeds
• Wide range of perforating blades available from Zünd
• Compatible with G3, S3, D3

The Pneumatic Oscillating Tool is an air-driven tool particularly well suited for cutting tough, dense materials but can also handle soft, thicker ones. The use of considerable air pressure in combination with an 8mm stroke gives this tool the force required for tough applications.

The POT is available in two versions, with 0.6 mm or 1.5-mm thick blades. With sufficient beam clearance, it is possible to process materials up to 110 mm / 4 in thick. A wide range of possible applications are supported with a variety of compatible oscillating blades.

• High-performance cutting tool with 8 mm stroke
• Powerful, low-maintenance pneumatic tool
• Two versions available for 0.6 mm or 1.5 mm blade thicknesses
• Compatible with G3, S3, D3, L3

High processing speeds and high-quality results equal to die cutting: The PCT tool cuts corrugated cardboard up to 7 mm thick and simultaneously compresses the material with a special glide shoe.

The press cutting tool has been developed for economical cutting of corrugated cardboard up to a thickness of 7 mm. During the cutting process, a specially designed glide shoe compresses the material along the cut lines. The pressure exerted on the corrugated cardboard enables the use of drag knives and facilitates high processing speeds.

• Special glide shoe for high-quality results equal to die-cutting
• Very high processing speeds
• Simple, precise depth adjustment
• Fully supported in Zünd Cut Center - ZCC
• Maximum material thickness: 7 mm
• Suitable for flat-stock drag knives
• Compatible with G3, D3, and S3

The Scoring Cutting Tool is used for scoring and through-cutting a wide range of materials up to 5 mm / 3/16 in thick. Depending on whether the material needs to be through-cut or scored, the blade is pneumatically extended or retracted. All flat-stock drag knives Zünd offers can be used with the SCT. An optional, spring-loaded glide shoe is available for processing challenging materials.

• Very high processing speeds
• The blade is pneumatically extended/retracted
• Can be used with all flat-stock drag knives Zünd offers
• Spring-loaded glide shoe available as option
• Compatible with G3, S3, D3

The Universal Cutting Tool is perfect for through-cutting various materials up to 5 mm/3/16 in thick. The use of drag knives allows for very high processing speeds. Compared to motor-driven tools, the UCT is very inexpensive to purchase and maintain. A spring-loaded glide shoe permits cutting very fine details. Optionally, a fixed glide shoe can be used for cutting at set depths.

• Wide assortment of Zünd drag knives available
• Very high processing speeds
• Compatible with G3, S3, D3, L3

The Universal Drawing Tool is a cost-effective tool for precisely marking/labeling materials including fabric, leather, rubber, and Teflon. This tool is used to draw assembly marks, line symbols, and text. Drawing/plotting is possible in any orientation.

The UDT is very cost-effective since it accommodates readily available, standard drawing/plotting tools such as felt-tip and ballpoint pencartridges available in various line widths.

• This tool is used to draw assembly marks, line symbols, and text.
• Compatible with G3, S3, D3

The V-Cut Tool is the perfect tool for producing complex, three-dimensional structural designs made of cardboard, foamcore materials or corrugated/honeycomb display board. A well thought-out design allows for quick tool changes and easy, precise angle adjustments.

The VCT can cut at seven different angles (0 °, 5 °, 10 °, 15 °, 22.5 °, 30 °, 45 °).

• Simple, precise angle adjustments
• Produces cuts at seven different angles
• Very quick blade changes
• Compatible with G3, S3, D3

The Universal Modules are widely applicable carrier modules designed to accommodate many different tools. The versatility of these modules makes it very cost-effective to adapt the cutting system to changing production requirements. 

A bayonet lock allows for quick tool changes without a need for a screwdriver. A new or different tool can be set up with little effort and made ready for use. Modules can be operated in pressure or position mode. For different applications, the Universal Module is available in four different versions.

• Exceedingly fast tool changes
• Tool detection
• Two operating modes: pressure/position