Gummi

Materials

  • Silicone
  • Natural rubber
  • Solid rubber
  • Latex film
  • Foam rubber
  • Sponge rubber
  • Ejection rubber

Tools for processing rubber

2 Product(s) found
Sorry, no suitable results found for these filters.
1 / 2
EOT
Electric Oscillating Tool

Cutting tool with high oscillation frequency for soft to medium-density materials.

EOT
Electric Oscillating Tool - EOT

The Electric Oscillating Tool is suitable for cutting soft to medium-density materials. The high oscillating frequency enables high processing speed and efficient throughput.

Depending on the application, the EOT is available with 0.5 mm or 1.0 mm stroke. To accommodate different substrates and levels of detail, Zünd offers a wide range of both flat and pointed oscillating blades.

  • Depending on application, available with 0.5 mm or 1.0 mm stroke
  • Perfect for cutting detailed contours
  • Very high stroke frequency
  • High processing speeds
  • Compatible with G3, S3, D3, L3
Product information
Material

Rubber

Twin-wall sheets

Cardboard

Leather

Foam

POT
Pneumatic Oscillating Tool

Powerful oscillating tool with extended stroke for cutting tough, dense materials up to 110 mm / 4.3 in thick.

POT
Pneumatic Oscillating Tool - POT

The Pneumatic Oscillating Tool is an air-driven tool particularly well suited for cutting tough, dense materials but can also handle soft, thicker ones. The use of considerable air pressure in combination with an 8mm stroke gives this tool the force required for tough applications.

The POT is available in two versions, with 0.6 mm or 1.5-mm thick blades. With sufficient beam clearance, it is possible to process materials up to 110 mm / 4 in thick. A wide range of possible applications are supported with a variety of compatible oscillating blades.

  • High-performance cutting tool with 8 mm stroke
  • Powerful, low-maintenance pneumatic tool
  • Two versions available for 0.6 mm or 1.5 mm blade thicknesses
  • Compatible with G3, S3, D3, L3
Product information
Materials

Rubber

Twin-wall sheets

Cardboard

Leather

Foam / 110 mm foam

Corrugated cardboard

Modules

1 Product(s) found
Sorry, no suitable results found for these filters.
UM
Universal module

Universal carrier modules for a wide range of tools.

UM
Universal module

The Universal Modules are widely applicable carrier modules designed to accommodate many different tools. The versatility of these modules makes it very cost-effective to adapt the cutting system to changing production requirements. 

A bayonet lock allows for quick tool changes without a need for a screwdriver. A new or different tool can be set up with little effort and made ready for use. Modules can be operated in pressure or position mode. For different applications, the Universal Module is available in four different versions.

  • Exceedingly fast tool changes
  • Tool detection
  • Two operating modes: pressure/position
Product information
Module versions

UM-S (S3, L3)
UM-ZS (G3, D3)

 

UM-ZP (G3, D3)
UM-120 (G3)
UM-60L (G3, D3)