
Twin-wall sheets
Materials
- Honeycomb paperboard
- Honeycomb
- Display board
Brands
- X board
- Re-board
- Coroplast
- Akyprint
- Allison Board
- Falcon Board
- Beelite
Tools for the processing twin-wall sheets

Powerful tool with high-performance electric motor for processing thick cardboard and leather.

The Electric Oscillating Tool is ideal for efficiently processing materials such as honeycomb display board, thick cardboard, and tough leather. This high-performance tool is equipped with a powerful air-cooled motor. With an extended, 2.5 mm stroke andhigh oscillating frequency, the EOT-250 is capable of processing challenging materials at very high speeds. Zünd offers a wide variety of high-quality blades for use with the EOT-250.
- 2.5 mm stroke
- Very high processing speeds
- Wide range of Zünd oscillating blades available
- Compatible with G3, S3, D3, L3
Rubber
Twin-wall sheets
Cardboard
Leather
110 mm/4 in foam

Powerful oscillating tool with extended stroke for cutting tough, dense materials up to 110 mm / 4.3 in thick.

The Pneumatic Oscillating Tool is an air-driven tool particularly well suited for cutting tough, dense materials but can also handle soft, thicker ones. The use of considerable air pressure in combination with an 8mm stroke gives this tool the force required for tough applications.
The POT is available in two versions, with 0.6 mm or 1.5-mm thick blades. With sufficient beam clearance, it is possible to process materials up to 110 mm / 4 in thick. A wide range of possible applications are supported with a variety of compatible oscillating blades.
- High-performance cutting tool with 8 mm stroke
- Powerful, low-maintenance pneumatic tool
- Two versions available for 0.6 mm or 1.5 mm blade thicknesses
- Compatible with G3, S3, D3, L3
Rubber
Twin-wall sheets
Cardboard
Leather
Foam / 110 mm foam
Corrugated cardboard

Universal cutting tool for materials up to 5 mm thick.

The Universal Cutting Tool is perfect for through-cutting various materials up to 5 mm/3/16 in thick. The use of drag knives allows for very high processing speeds. Compared to motor-driven tools, the UCT is very inexpensive to purchase and maintain. A spring-loaded glide shoe permits cutting very fine details. Optionally, a fixed glide shoe can be used for cutting at set depths.
- Wide assortment of Zünd drag knives available
- Very high processing speeds
- Compatible with G3, S3, D3, L3
Vinyl
Twin-wall sheets
Cardboard
Textiles

Perfect for producing complex, 3D structural designs made of twin-wall sheets, cardboard, or foam.

The V-Cutting Tool is the perfect tool for producing complex, three-dimensional structural designs made of cardboard, foamcore materials, or corrugated/honeycomb display board. A well-thought-out design allows for quick tool changes and easy, precise angle adjustments.
The VCT1 can cut at eight different angles (0°, 5°, 7.5°, 10°, 15°, 22.5°, 30°, 45°).
- Simple, precise angle adjustments
- Produces cuts at eight different angles
- Very quick blade changes
- Compatible with G3, S3, D3
and much more
Applicable Modules

Universal carrier modules for a wide range of tools.

The Universal Modules are widely applicable carrier modules designed to accommodate many different tools. The versatility of these modules makes it very cost-effective to adapt the cutting system to changing production requirements.
A bayonet lock allows for quick tool changes without a need for a screwdriver. A new or different tool can be set up with little effort and made ready for use. Modules can be operated in pressure or position mode. For different applications, the Universal Module is available in four different versions.
- Exceedingly fast tool changes
- Tool detection
- Two operating modes: pressure/position
UM-S (S3, L3)
UM-ZS (G3, D3)
UM-ZP (G3, D3)
UM-120 (G3)
UM-60L (G3, D3)